How to clean a mouton fur coat at home

Among the many ways to clean mouton fur, there are 7 effective methods and 6 methods that will only cause harm. On many, and indeed on all Internet portals, these cleaning methods are recommended, after which the fur coat must be thrown away.

We do not recommend using these methods and provide a video that shows the harm from their use. After reading our article, you will find out which methods can be used and which ones should not be used.

This article will describe several constructive tips on how to clean a mouton fur coat at home.

The first thing you should know is that it is best to start the cleaning process in the spring, when warm outerwear is no longer needed.

This is explained by the fact that after cleaning activities it will be possible to thoroughly dry this fur outfit in the fresh air, ridding it of foreign odors.

Cleaning at home will not cause any great expense or difficulty, but it will help to extend its service life.

Cleaning products for Mouton fur coats

There are many methods and folk remedies that allow you to clean a mouton in a short time. However, certain methods are considered the most popular, since they do not harm fur surfaces and demonstrate high efficiency.

Before starting processing, you need to familiarize yourself with the basic rules and recommendations regarding this process. Otherwise, you can cause irreparable damage to the material and make your favorite product unsuitable for further use.

The first rule is that cleaning is best done in the spring, when warm outerwear is no longer needed. This will allow you to thoroughly dry the fur in the fresh air and remove any foreign odors.

To renew fur or freshen up an old fur coat, it is not necessary to buy expensive compounds or household chemicals. A large number of effective remedies can be found in the kitchen or in the refrigerator. When choosing a suitable option, it is necessary to assess the degree of contamination.

Soap solution

You can clean a mouton fur coat at home using a proven folk remedy - soap solution. The method is intended for lightly soiled and light-colored surfaces. To prepare the composition, you need to follow these instructions:

Shampoo or liquid soap is diluted in a container with warm water.
The components are mixed until a thick foam forms.
After this, they are applied to the fur and left to dry for some time. When the solution dries, it needs to be combed out with a soft brush.
Then the fur coat is moved to a place with good ventilation for drying.

Soap or shampoo can be replaced with washing powder. However, when choosing such a product, you should make sure that it does not contain whitening additives.

The popularity of soap solution is due to its harmless and gentle effect. In addition, the composition is universal and suitable for different types of fur.

Vinegar

Table vinegar works well against stains on the muton. And although the process takes a lot of time, it provides a lasting positive effect. To prepare the solution you will need to perform the following steps:

Mix vinegar, water and alcohol in equal proportions in a bowl.
Dip a brush or clean cloth into the mixture and begin combing the fur coat in the direction of the pile.
Next, you need to run a dry cloth over the mouton and move the fur coat away from heat sources to dry.

Acetic solutions are capable of removing complex greasy and difficult-to-remove impurities. However, they cannot get rid of yellowness.

This method is suitable for cases where dry cleaning does not give good results. This could be grease, contact with food, fatty deposits or other traces that are difficult to remove with a simple brush.

Steam

You can clean a mouton fur coat at home with a steam generator using the delicate mode. To carry out this procedure, you need to place the product on hangers. During operation of the device, the steam should slightly touch the fur. If this rule is not taken into account, vulnerable material may deteriorate.

The technology allows you to fight unpleasant odors, straightens the fur and restores its previous volume.

Hydrogen peroxide

Buying a light fur coat is the best holiday for every woman. However, light-colored surfaces quickly become covered with stains, yellowness or other contaminants that spoil the attractive appearance of the product and require urgent removal. To treat a mouton item at home, you can use a solution of hydrogen peroxide. The method of using the tool is quite simple and is as follows:

Pour 0.5 liters of water into a suitable container.
Add 3 tbsp to the solution. l. salt.
Enter 1 tsp. hydrogen peroxide.

This composition effectively removes both yellowness and greasy stains. It also has a whitening effect and does not harm fur surfaces.

Starch

If it is not possible to dry clean a mouton fur coat or wash it in an automatic washing machine, you can use another popular method - cleaning with starch. This affordable product perfectly fights dirt on light fur, removes dust and grease.

The potato additive should be scattered over the surface of the mouton, and then begin to be rubbed with slow massaging movements. All impurities will quickly be absorbed into the starch, causing it to change its color. After completing the treatment, the fur coat must be shaken to get rid of any remaining substance. The action is repeated until the product becomes as clean and snow-white as before.

The technology is very popular due to its effectiveness and accessibility. At the same time, it frees owners of beautiful fur coats from the need to visit dry cleaning.

Ammonia

If your fur coat is covered with dark spots, you can get rid of them with the help of ammonia. To prepare the product you will need the following ingredients:

1 part ammonia;
4 parts water.

After thoroughly mixing the components in the solution, you need to moisten a cotton swab and begin wiping the mouton product. Even if the fur coat is not heavily soiled after the winter season, it is better to clean it as a preventive measure. After such events, the item is packed in a special case and moved to a closet for storage.

Petrol

An original and unusual way to clean mouton fur coats is to treat them with gasoline. To prepare a cleaning product, you need to combine starch with a flammable substance, stir them to a paste and apply it to the fur. It is important to wait some time for the solution to dry completely. You can get rid of starch residues with a special brush. After all the activities have been completed, the fur coat should be ventilated in the open air to remove the smell of gasoline.

Using this method, it is important to take into account the mandatory rule - gasoline must be exclusively aviation, since all other varieties leave behind stains. To eliminate such a nuisance, you need to conduct a simple test and apply the product to a small area to assess the reaction.

In what cases is it better to contact a dry cleaner?

Sprays and folk remedies do not always help to cope with dirt or grease accumulated on the mouton. The procedure for removing persistent stains is labor-intensive and requires skills in working with chemicals and fur.

If the area of contamination is large, take the item to the dry cleaner. The workshop will remove fat and vomit, remove the smell, and return the gray and black paint to its original color.

The mouton rolls up when worn, professionals can clean it and give it its former shine.

https://www.youtube.com/watch?v=vO9qDPv-Cfg

Professional cleaning products

In addition to traditional methods, professional cleaning products are used to care for a Mouton fur coat. They remove complex contaminants from the fur surface and give it an initial shine and cleanliness. The most effective compositions include:

Insaf is a special spray for cleaning lint, restoring snow-white cleanliness and combating unpleasant odors. The composition also provides protection against moths. When using it, you need to spray the spray from a distance of 20 cm and begin wiping the surfaces with a cotton cloth. If there are stubborn stains, the procedure will need to be repeated twice.
Ultra-finish Milk is a substance produced by an Italian company and is intended to restore the shine and silkiness of fur. It also smoothes out hairs.
BIOFUR is a popular series of cleaning products for fur care. The compositions clean the surface of the mouton fur coat, restore shine and have a delicate effect on the pile.

How to refresh a mouton fur coat

After a long stay in the closet, a mouton fur coat becomes covered with dust and dents. However, it is not necessary to send it to the dry cleaner or treat it with aggressive cleaning agents for such problems.

To refresh fur at home, just follow these recommendations:

The product is taken out of the closet, shaken and hung on a hanger.
After this, the fur coat is covered with a damp cloth, which has been pre-treated with a low-concentrated vinegar solution. Then you need to hit it with your palm to shake up the dust.
The following activities are performed using a special brush.

This method removes dust from the fur coat and makes it snow-white. It also straightens caked-on lint and fights even stubborn stains.

Some women freshen their mouton fur coat with a vacuum cleaner. When using this cleaning option, you need to make sure that the nozzle on the device is clean and the minimum power mode is selected.

In some cases, rough combing is allowed. This is done with a brush with iron teeth intended for animals.

Experts advise caring for Mouton products at least once a month. This way they will look brilliant.

Cleaning from dust

Fur items absorb dust well . Therefore, even in the absence of visible dirt, it would be useful to periodically subject the fur coat to light cleaning.

To do this, just shake the mouton well (it’s better to do this outside) or use a vacuum cleaner turned on at minimum power mode.

Before using the vacuum cleaner, check that the nozzle is exceptionally clean. The smallest particles are instantly transferred to the fur due to static attraction.

In ecologically clean regions, you can lay out your fur coat on the snow, pile side down, and gently beat it with a beater . After this, shake it so that no snow remains on the fur. Otherwise, when it melts indoors, it will harm the pile.

An alternative to this technique is a wetted and wrung out sheet, which is covered with a fur coat and lightly tapped on top (like a carpet). Hang on hangers to dry.

Removing dirt and stains

If severe stains or dirt appear on the mouton coat, they can be dealt with in the following ways:

You can eliminate the problem of greasy stains with powder and shampoo. These products are combined in any suitable container and then applied to the contaminated area. After 10-15 minutes, the remaining composition should be washed off with a clean piece of cloth.
Dirt stains are removed with ammonia and salt. A cotton pad is soaked in the solution, after which the stains are wiped with it.
To remove dirty stains, it is allowed to use a mixture of alcohol, vinegar and water, combined in equal proportions. The product is applied to the pile using a kitchen sponge or brush, and then washed with a paper towel.
Areas with heavy contamination are treated with a cotton swab soaked in gasoline. To remove unpleasant odors from the fuel mixture, you need to sprinkle the area with corn or potato starch. The composition is rubbed into the fur and then removed with a damp cloth.
You can get rid of dirt with simple bran. They need to be heated in a frying pan and applied to problem areas of the fur coat. The bran particles must completely absorb contaminants. After processing, they should be shaken and the fur combed with a special brush. Sawdust can be used as an alternative for bran. They are available in pet stores and do not leave marks on the fur coat.

If you have difficult stains from chocolate or alcoholic drinks, it is better to contact a dry cleaner.

Method 5 - peroxide

This method is most suitable for caring for light-colored items, as it has a slight whitening effect. You will need to take equal parts peroxide and water, apply it to the hair and leave it for a while. When this product dries, it will need to be removed with a brush.

Advice:

If you use this method to work not with white, but with light beige or cream products, you definitely need to check before using it to see if the product presented will not leave white spots on the product. To do this, it is recommended to prepare a cleaning composition and apply a small amount of it to the pile. If you notice that the fur changes color under its influence, under no circumstances apply it to the entire fur coat.

Dry cleaning

The dry method is in demand when you need to remove stains as quickly as possible. In most cases, street dirt appears on fur products, and to remove it, you need to wait until it dries and comb the pile with a special comb.

This device is made of natural fur, so during use it does not harm the fibers. The presence of dense padding ensures effective combing out of stains.

If the method does not give positive results, you will need to prepare a weak Vanish solution and apply it to the problem area. Due to the absence of aggressive additives in the composition, the product will delicately get rid of dirt and make the pile soft. A couple of minutes after this treatment, you need to brush the surface again.

Method 2 - ammonia

This method will help you get rid of even greasy stains. To prepare the cleaning solution, in this case you will need:

3 tablespoons salt;
a teaspoon of ammonia;
500 ml water.

These components must be thoroughly mixed, applied to the item, and then removed with a brush. It is especially recommended to use this recipe for working with light-colored items, since it can still lighten dark items a little.

There is another option for using ammonia for processing fur products. It is recommended for use in cases where light fur has turned yellow. To do this, you should take a jar of peroxide, add a few drops of ammonia there, and then put the resulting mixture on a sponge and treat the wool with such a sponge.

Removing unpleasant odors

A negative feature of natural fur products is the rapid absorption of unpleasant odors. It is impossible to eliminate them with the help of perfumes or refreshing aerosols, so you will need to resort to folk recipes:

The fur is treated with a vinegar solution (6%), and then hung on the balcony. The product neutralizes unpleasant aroma and leaves no traces behind.
To clean dark fur, you can spray it with orange juice diluted half with water from a spray bottle.
The dried fur coat should be rolled up with the fur side inward, placed in a plastic bag and placed in the freezer for 24 hours.
Areas with a strong odor are treated with ground coffee beans and placed in a plastic bag for 10-12 hours. Then the remaining coffee is removed with a brush. The technology cannot be used to clean a light fur coat.
You can place lavender moth bags in the pockets of your fur coat, and then place the product itself in a fabric bag.
To eliminate a slight odor, hang wet towels near your fur coat. They draw in strong odors such as tobacco.

Some useful tips

It is highly not recommended to clean mouton fur with undiluted vinegar or acetone.
If the fur coat is wet, you only need to sew it in a natural way. The use of electrical appliances will damage the fur, deform it and possibly discolor the product.
Spraying perfume on a mouton has a detrimental effect, along with hairspray.
You definitely cannot wash a fur coat in a washing machine.
After cleaning has been carried out in any way, the fur coat must be combed with a brush.
Unless absolutely necessary, you should not apply any kind of cleaning to a mouton fur coat.

Don't forget to share the article with your friends and join us on social networks

Lining care

When wearing a mouton fur coat, you may encounter both external and internal pollution. They often appear on the lining, which forces the owner of the product to put a lot of effort into removing the stains. If the lining is not removable, it will be difficult to clean.

Soap solution can be considered as an effective solution. It is used according to the following instructions:

A sponge or cotton swab is immersed in the soapy mixture, wrung out thoroughly and used to wipe problem areas.
After this, the surfaces are cleaned with a sponge treated with clean water.
The lining is dried with dry wipes.

If it is possible to unfasten the lining, it should be washed in a warm soapy solution, rinsed and dried. For washing, you can only use warm water. Otherwise, the material will shrink and the fur coat will lose its shape. You can remove yellow stains with hydrogen peroxide, salt and water.

Starch

Ordinary starch can help in cleaning a white mouton fur coat. First, the product must be spread on a horizontal surface, then evenly sprinkle the fur with starch.

Next, you will have to handle every centimeter of the fur coat with your hands, making smooth massage movements. At the same time, you should not wring or press in the fur too much.

The main thing is that there is maximum contact between the starch and the fur. As a result, dust and dirt will transfer to the starch, and it will turn gray. Repeated procedure will give better effect.

If the white fur is artificial, read how to clean it in our article.