Fur hats look very impressive and provide great warmth in the cold winter, but fluffy fur has a drawback. The thick pile, due to its texture, is like a brush collecting various contaminants. Dust settles between frequently located hairs. Snow, fog, wind, a humid and oversaturated atmosphere with exhaust gases - all this negatively affects the cleanliness of the fibers.
Second stage of cleansing
You cannot simply wash a fur hat at home in a regular washing machine if it is made of natural fur.
If it is not possible to use dry cleaning services, you can use folk remedies for cleaning. To do this you will need:
- 1 liter of warm water;
- 100 ml vinegar;
- 100 ml alcohol;
- 10 ml of wool rinse.
The ingredients are dissolved in water, then carefully applied to a brush or napkin, which is used to iron the fur from bottom to top. The main thing is not to wet the base and the inside. Dirty lining must be cleaned separately.
It is easier to wash a faux fur hat - you can use a washing machine for this. The cleaning agent can be a gel for cleaning wool items. The washing water should be warm, and the spin speed set on the machine should not exceed 800. If there is an additional natural finish, it must be stripped and cleaned separately.
Knitted hat - washing rules
If the product is made of synthetic thread, then it should be washed as indicated on the label. If you knitted the hat by hand, then recommendations for threading should be found on the label of the skein. A fairly simple way to wash a knitted hat is to put it in a washing bag and put it in the washing machine.
Wool can be easily washed by hand, especially in a special shampoo for this type of thread.
If the product is too dirty, it can be soaked for a couple of hours in a suitable detergent. You can soak the wool in cold water with a little vinegar added - this way the hat will certainly not fade.
To wash a hat by hand, take lukewarm water into a small basin, dilute the detergent in it and immerse the product. The cap is carefully washed by hand, being careful not to tug or pull. Heavily contaminated areas are lightly rubbed. To prevent the product from shrinking or fading, you need to maintain the temperature. Wool does not like hot water and should be washed at 30.
Wring out such things very carefully so as not to deform them. It is best to remove the product from the water, lightly squeeze it by hand over the bathtub, and then lay it out on a terry towel and roll it up. This way the towel will absorb excess moisture and you can lay out the cap to dry. There is a little secret to proper drying - if the hat is knitted from mohair or fluffy wool, then it can be wrapped in a bag and put in the freezer for a couple of hours. Then the headdress will become even more fluffy and voluminous.
We suggest you read How to remove superglue: the best methods for various surfaces
Storage rules
Improper storage is one of the main reasons for the appearance of dirt on the cap. Helpful Tips:
- store the item wrapped in cotton cloth along with moth repellent;
- periodically check the condition of the headgear during storage;
- do not allow a damp environment in the closet or chest of drawers where the hat is located, ventilate the furniture frequently;
- Avoid exposing the stored product to the sun.
We invite you to familiarize yourself with Woodlice, how to fight them
You can clean a mink hat at home using either dry or wet cleaning. Getting rid of local contaminants and unpleasant odors is also not difficult if you follow all the cleaning recommendations and properly prepare for the procedure.
How to wash a knitted mink hat
The fashionable product is made from thin strips that are woven into the mesh of the finished fabric or knitted using a special technology.
The hat looks amazing, but the time comes when it’s worth refreshing the device. You should prepare and, depending on the color of the fur, housewives should decide whether it is possible to wash a mink hat with this particular composition, so as not to worsen the contamination. Experienced housewives recommend:
- You can wash a product made of natural fur using shampoo, which is diluted in a basin, foaming with a stream from the shower. Use a sponge to scoop out the resulting foam and then, without rubbing, apply it to the product. The remaining foam is removed with a sponge soaked in clean water, carefully squeezing it out.
- You can also clean it using a product for natural silk or wool.
By following the instructions on the packaging, you can easily get rid of stubborn dirt. But you need to wash it carefully so that the fur does not get wet to the very base, otherwise the product will decrease in size. For knitted items made from dark fur, you can safely take mustard powder, which is first diluted in water to a porridge-like mass, which is applied to the pile, leaving for minutes, and then comb out the remnants of the powder that has absorbed the dirt.
A clothes brush will help remove grains.
- Semolina or ground bran will help get rid of impurities. The composition is applied to the entire surface of the product, gently rubbing it into the fur. After the minutes have passed, remove the cereal with a brush. The product is shaken and dried naturally.
- If housewives are heavily soiled and are puzzled by questions about how to wash a knitted mink hat, alcohol and vinegar will come to the rescue.
Using a substance made from a liter of water at room temperature with the addition of 10 ml of a special rinse aid for woolen products, into which vinegar and alcohol are poured ml each, treat the surface of the mink hat, preventing the base from getting wet. The sponge must be moistened, but not wet. The product is applied both in the direction of the pile and against it. - A mink beret or a knitted hat can be cleaned with salt. Dissolve a heaping tablespoon of salt in a ml of water and add 3 tbsp. l. alcohol The brush is moistened with this composition and carried out in the direction of hair growth, and later in the opposite direction. To prevent the product from losing its shape, the beret is stuffed with newspapers, forming the desired shape.
- Greasy areas are treated with vinegar, which is applied to a cotton pad.
- Grease stains are removed using purified gasoline, which is applied locally to the stain.
In minutes there will be no trace of grease or the aroma of gasoline.To find out whether a factory-produced knitted mink hat can be washed, you need to study the manufacturer’s advice on the label. Knitted items with mink stripes may only be washed very occasionally. In this case, you need to use hair shampoo with conditioner and immerse the product in water whose temperature does not exceed 30 degrees. The hat should not be rubbed in water; manipulations should be reminiscent of washing your own hair.
We invite you to familiarize yourself with the 15 most popular juicers - Rating 2021 (Top 15)
Rinse with conditioner for woolen clothes, let the water drain without twisting. Dry straightened on a terry towel, then pull the barely wet cap onto a 3-liter jar. If knitted hats have fur pompoms, it is better to remove them during traditional washing.
Dry bleaching
You can clean mink fur at home using dry bleaching methods. To do this, use substances that absorb excess moisture and dirt well and remove dust deposits. The following gentle components are used as dry bleaches:
- semolina;
- starch;
- talc;
- chalk;
- bran;
- sawdust.
The main feature of this cleaning method is that it does not require the use of liquid, so the product will not need to be dried.
Semolina
Semolina grains perfectly absorb dirt and also remove dust. For processing, the product should be placed on a table or clean floor. If you need to clean your hat with semolina, you need to put it on a three-liter bottle wrapped in a towel.
You should clean the fur with semolina according to the instructions:
- Sprinkle problem areas with a small amount of semolina.
- The entire surface is carefully combed with a brush with soft bristles.
- After the semolina turns gray, it is removed. If necessary, cleaning can be repeated.
You can remove semolina by shaking the product or vacuuming it. In the latter case, only weak devices should be used.
Gasoline based mixtures
A mixture made from potato starch and gasoline will help deal with yellowing. Both components are mixed until a mushy mass appears. The mixture is distributed over all contaminated areas and left until completely dry. The fur is carefully combed out using a fine-toothed comb. If desired, you can remove the applied product with a low-power vacuum cleaner.
Another effective remedy is sawdust soaked in a small amount of gasoline. The resulting product is distributed over the yellowed pile, and then gently rubbed into the product and left for 2 hours. The sawdust is shaken off and the pile is carefully combed out with a comb.
Wheat bran
The fur collar can be cleaned using wheat bran heated to 60 degrees. The product is heated in a clean frying pan, and it should be stirred regularly. Hot bran is poured in an even layer onto the pile, and then gently rubbed into it using a soft brush.
The applied product should be removed only after it has completely cooled. To remove small bran particles, comb the pile with a fine-toothed comb.
Talc, chalk, combed out with a comb
White talc, which is sprinkled evenly on the product, will help clean dirt and dust from a fur coat or hat. The ingredient is gently rubbed into the pile using a brush or fingers. After 2 hours, the talc is shaken off, and its remains are combed out with a special brush.
In a similar way, chalk or potato starch can be used to clean a fur coat or hat. For processing, chalk powder is used, which you can buy or prepare yourself by grinding a block.
Cleaning a snow-white mink hat correctly
Elegant items made of light fur are a chic addition to a fashionista’s wardrobe, but it is impossible to hide dirt on them.
The city man succeeded, dust, touching with hands - everything leaves an imprint on the product. Owners of such items should know how to wash a snow-white mink beret. Advice from experienced housewives should be taken into account:
- Talcum powder is sprinkled on the surface of a hat or beret, gently rubbing it into the pile. After 3 hours, you can remove grains of talc by shaking the item well, then comb it with a blunt-toothed brush.
- But how to wash a snow-white mink hat, which over time has acquired a treacherous yellowness?
Bran or heated starch are also great for removing dirt on snow-white fur. They absorb dirt and are later easily removed from the surface of the skin.
Hydrogen peroxide will come to the rescue, which is diluted with water and treated with a cotton pad. You can use a spray bottle to spray your hat or beret.
After the procedure, the fur becomes radiant. Knowing how to wash a mink skin or a finished product, owners will enjoy the attractiveness of an elegant item for a long time.
Dry cleaning
Cleaning a mink coat using the dry method is the simplest and most gentle method for fur. For this method, products such as talc or starch are well suited, which best help deal with dirt on a white mink coat.
In order to carry out dry cleaning, you must first shake the item from dust, spread a sheet and place the item on it. Then you need to rub the selected cleaning agent into the pile and after a while remove it by shaking the item well.
Another good cleaning agent is sawdust. You can buy such sawdust at any pet store.
To clean them, you need to mix them in a suitable basin with clean gasoline and place the fur coat in it. After such a “wash”, it is necessary to remove sawdust and allow to dry.
Cleaning from dirt
- You can clean a mink fur coat from dirt using regular semolina, as it perfectly absorbs any dirt. The surface of the item must be sprinkled with semolina, and then carefully combed with a fine-toothed brush in the direction of the lint growth. In order to completely get rid of all the remaining dirt and semolina after cleaning, you should shake the fur coat well.
- If there are fresh traces of dirt, they must be allowed to dry before starting cleaning. And only after that, using a regular cleaning brush, begin to remove dirt. After this “combing”, the fur coat must be shaken well several times.
- Regular talc will help get rid of dirt. To do this, you need to pour the product onto the pile and rub the talc with your hands. After cleaning, residues are easily removed from the surface of the fur coat after thorough shaking.
How to properly wash a hat
Each material requires special conditions. Before you start washing your hat, do the following:
- determine the type of outer material of the hat;
- determine the type of fabric from which the lining of the hat is made;
- carefully study the symbols on the label; the basic rules for caring and drying the product are usually stated there;
- if the hat has false fur, decorative details with fasteners and other removable parts, they should be unfastened before washing;
- For many hats, ordinary powders are not suitable, so it is better to purchase a mild detergent in advance or use regular hair shampoo;
- Be sure to follow the washing conditions for each product: the appropriate mode, temperature and rinsing/no rinsing are also written on the label.
Professional laundry detergents
When the pompom cannot be separated from the headdress, housewives also wash the hat, protecting the fluffy part in various ways. But here the safety of the fur pompom cannot be completely guaranteed.
- Wrap the pompom in a regular plastic bag and tie it at the base with a strong rope. Then gently wash the hat by hand.
- Place the knitted hat with a fluffy pompom into the machine drum. It is recommended to use liquid products as they are more gentle than conventional powders. Ideal for delicate fabrics. From the available washing programs, select “hand wash”, “wool” or “delicate wash”. Spin at the lowest speed. The temperature is set no higher than 30 degrees.
- It is better to wash a children's hat with a pompom by hand. The product is completely soaked in warm water with a liquid product or using baby hair shampoo. The latter is optimal for knitted wool hats.
- If you don’t want to take the risk of cleaning a hat with fur decoration yourself, you can take it to the dry cleaner, where the product will be given a neat appearance. But such services are expensive.
To wash knitted hats, use liquid washing gels and powders for wool: Vanish, Laska, Woolite, Perwool, Frosch, Dix, Persil. Granules of conventional powders are poorly washed out of the fibers, making the material hard and the pompom faded.
Hat with pompom
There are two washing options here. If the pompom is made from the same yarn as the hat, then it must be washed together with the headdress. Most likely, the threads of the pompom have become matted due to washing, so after drying you will have to tidy it up and return it to its fluffiness. This is done with a wide-toothed comb, preferably made of wood. You can also straighten the pompom with a knitting needle, unraveling the thread. Do this carefully so as not to tear the threads out of the pompom.
With a pompom made of fur, things are much more complicated. Natural fur does not need to be wet, otherwise it can be damaged. You'll have to rip off the pompom. The headdress is washed in the described way, and the pompom is simply cleaned by dry cleaning, for example, using bran or starch.
What to do if you can’t rip off the pompom?
In this case, cunning housewives came up with their own way of washing. The pompom is simply tied tightly in film and tied tightly at the base. Then the cap is washed by hand, trying to prevent moisture from getting on the bag. Still, a little moisture may seep in, but usually this does not spoil the fur much. When the headdress is dry, the film is removed and the fur is combed with a brush.
Tips for caring for fur
When deciding on the option for washing a mink hat, you must remember that any contamination must be removed in a timely manner. If the stain that appears is ignored, then over time it will begin to eat into the fur, and then it will be much more difficult to do anything. When you use chemical solutions, be careful. Mink fur is very sensitive to various types of reagents. This means that any wrong decision, movement, etc. can completely ruin your headdress.
In turn, when washing dark hats, you should not use brighteners. Thus, hydrogen peroxide can give any fur light tones. However, its use for processing dark fur products is unacceptable. In addition, do not use stain removers when washing. They contain active chemical compounds that can react with fur and ruin it.
