How to reduce the size of a fur coat and sew it on the sides, shoulders, and sleeves

Mink is the best gift

Many representatives of the fair sex dream about a mink coat. This is truly a very chic and expensive product. However, it is even more valuable if it is presented by a loved one.

Today, stores offer a huge selection of mink fur coats in different color shades, so choosing the most beautiful one in your opinion is not so difficult. But for a man who decided to please his beloved woman with such a gift, it is important not to make a mistake with the size.

But what if the size he chooses doesn’t suit you? For example, a short fur coat is a little wide at the sides or at the shoulders. Then you will need to sew the product in so that it fits you properly.

How to remake an old mink hat: ideas, before and after photos

We bring to your attention several ideas on how to remake an old mink hat.

From two hats

Beret

Knitting method

With ears

Option

Idea

Different colors

Having altered

Changing the style

How to suture at home

It's not difficult to do this. You can ask for recommendations from professionals, and also watch training videos on the Internet.

If the short fur coat is too big for you in volume, it can be sewn in on the sides and shoulders. Then the mink beauty will fit your figure perfectly.

When performing this procedure, you need to take into account the cut of the model. By changing its lines, you can achieve a perfect fit of the item to the figure of its owner.

So a short fur coat of a classic cut and a loose-fitting model can be reduced by size if you change the side seam and armhole line of the product. Look at the following photo: it shows a diagram of the work.

In other styles, in addition to these two operations, changes in the cut of the collar and hems may also be necessary.

If you have sewing supplies available, then you can safely get to work.

Is it possible or not to remake or trim a fur coat, breathing new life into it?

There is simply no more noble, elegant, and at the same time more expensive material for sewing products than fur.
At the same time, fur is the most expensive material. This is especially true for fur coats. You can’t throw away a fur coat that once fit and has become too big. What for? After all, it can be easily and simply sutured on the sides and worn again. And if you also trim it from the bottom, then, in general, you will get a new model of fur coat. In fact, sewing, as well as hemming, a fur coat from the bottom is not difficult. All this can be done perfectly yourself at home. Fur is a natural material, and any work on altering it is not difficult. If desired, you can easily trim a mink coat, and it can also be completely remade by sewing in the sides. Of course, this requires some tools and materials. But you can still do this at home without going to a studio.

What tools are needed for altering fur coats?

• The first thing you need is a needle designed for working with leather and fur items. This needle can be purchased at the store.
• The second thing you should pay attention to when undertaking any work on altering fur coats is the presence of threads that match the color of the fur coat and threads that match the color of the lining material. The threads must be special for fur. It is also advisable to have a special tape that is placed in place of the seam for strength reasons. Some professionals recommend stocking up on special glue, which will then be used to seal the seams of the product for greater strength of the seams.
• The third thing you need is a blade that will cut off excess pieces of fur. Instead of a blade, you can purchase a special knife for working with such products.
• Chalk or a piece of soap. They are necessary for making notes on the material. After all, the line along which the fur coat will need to be trimmed or sewn in from the sides needs to be outlined. Only precise lines on the fur will allow the scissors to move correctly.
• Naturally, you will need a centimeter or ruler. Otherwise, you won’t be able to measure the piece that needs to be cut.
• It will be ideal if someone helps you with this.

How to trim a fur coat correctly? Cutting technique at home

If the product does not need to be sutured on the sides, then trimming the fur product will be quite simple. To do this, you just need to decide how much to cut the fur coat? Once this has been decided, the lining fabric is ripped open and excess fur is trimmed off.

Here it is worth considering that 3 cm is left for the seam allowance when working with fur coats. Then the lining is connected to the fur with even stitches.

You can see for yourself that this is not difficult by quickly trimming your fur coat.

The fur coat is too big, is it possible to sew it on the sides yourself?

Sewing a fur coat on the sides is somewhat more difficult than simply cutting it off from the bottom. But if you clearly know the sequence of your actions, it will not be difficult. The following stages of work can be distinguished:

• Trying on the product, allowing you to see the places that need to be sutured. When trying on a fur coat, you need to clearly remember that it should not tightly fit your figure. You need to feel free in it.
• Next, the lining fabric is peeled off.
• After removing the lining, you can rip out the side seams. This is done in order to cut off excess fur. After the fur is cut off, you can sweep the skins of the product back. After the short fur coat is sewn in, does it become noticeable that the armhole of the product has decreased? There's nothing wrong with that. You'll just need to remove some of the fur on the sleeves. The sleeves can be easily opened and excess fur can be cut off. They can then be easily basted and attached to the armhole.
• Trying on a sewn item. If the fur coat does not restrict movement, then it has been altered correctly.
• Sour cream skins are sewn together on a sewing machine. You will need a special needle for the machine. There’s no way without her.
• Working with lining fabric. All that remains is to baste and sew on the lining. This may also require special needles to secure the lining and fur. And the lining is sewn to a special braid that is on the fur coat.
• And finally, you need to comb your fur coat and smooth out the disheveled pile.

OK it's all over Now! The fur coat has been altered! Now you can choose accessories and shoes to go with it! Please note that the headdress must be selected according to the color of the fur coat. New leather gloves and a shawl will go perfectly with the fur coat. When choosing a handbag, you need to pay attention that it cannot be worn on the shoulder.

A little about whether you need a machine when altering fur coats at home?

In fact, you can alter a fur coat either on a sewing machine or by hand. After all, even the most famous designers often sew their designer fur coats by hand. Most of the operations during the initial sewing of fur coats are carried out manually. And only some of them can use a sewing machine. And many fur products are completely handmade.

Fitting

First, try on your mink fur coat. This is done in order to determine the places where it needs to be sutured. Experts remind that mink outerwear should fit relatively loosely. After all, mink does not have very high thermal insulation properties, so in winter you often want to wear a warm sweater underneath it. This must be remembered when taking measurements.

The difference between a complete recut and restoration and incomplete alteration of a fur coat

Restoration or partial recutting is carried out without changing the model and consists of:

• fit;
• replacing the lining;
• other types of work that improve the appearance of the product.

The cost of partial recutting is 6 thousand rubles. and more.

When a fur coat is completely recut, the product is disassembled into parts and reassembled in a modified form. The master in the studio carries out this process in the following order:

• selection of an updated model, development and approval of a sketch, taking the client’s measurements;
• creating product patterns, making a model and trying it on;
• dry eco-cleaning, for which a sliding drum is used;
• cut, sew a fur product;
• final fitting.

If there is a complete cut, for example, from a fur coat into a vest, the first one will have to be completely disassembled into parts, and then assembled as a fur vest. The whole procedure is carried out step by step:

• choosing a new style of fur vest, developing and approving a sketch, taking the client’s measurements;
• creating product patterns, making a model and trying it on;
• dry eco-cleaning using a sliding drum;
• tailor, sewing a vest;
• final fitting.

To completely transform it into a jacket or short coat, the fur coat must be completely disassembled into parts and reassembled, but as a jacket. The whole process is performed in a certain sequence:

• choosing a new jacket style, developing and approving a sketch, taking measurements;
• creating fur jacket patterns, making a model and trying it on;
• dry eco-cleaning using a sliding drum;
• cut, tailor a jacket;
• final fitting.

Seams

Now open the seams on the mink skins on the sides of the product, remove extra centimeters of fur and sweep the sheets towards each other. If as a result of this the armhole of the sheepskin coat has been greatly reduced, then some fur will have to be removed from the sleeves as well. To do this, first space them out. And after trimming the excess fur, sweep away the sleeves of the short fur coat again and connect them to the armhole.

Before altering an old mink hat, check the inside: tips

Important: Be sure to inspect the interior and the fur itself before starting work! The pile should not crumble, and the core should be dense and moderately hard, but not over-dried by time! If the product is already crumbling at the disassembly stage, then during sewing the core may even crack.

1. To remake an old mink hat, you need to completely or partially disassemble it. In any case, even if the changes are minor, we will definitely change the lining! To do this, carefully evaporate the old base and peel it off from the fur.
2. If you used a lot of gelatin when gluing, then wet the inside of the cap well. Don't get the fur wet! And lightly tear the flesh from the base.
3. When you have taken the hat apart, be sure to inspect the leather part! Old flesh can deteriorate, especially if it was poorly repaired. In this case, acid begins to accumulate, which literally eats away the flesh.
4. To do this, wet the flesh and pull it a little. It should become plastic and not tear.
5. If you are working with pieces, then trim off all the irregularities. You can just test them for strength - lower the fur trimmings into water for 10-15 minutes. Bad fur will literally begin to fall apart in your hands. You can't work with such fur! If the product is not sewn, then it will fall apart when worn.
6. Ideally, strengthen any punctured or worn areas. You can use special glue and thin fabric. Moment glue and spunbond (used in furniture production) proved to be the most durable We cut strips 1 cm wide, grease them with glue, and apply glue to the leather base.

Strengthen the fur around the perimeter and in weak spots!

Stitching

Only if the fur coat fits you perfectly, sew the fabrics together using a sewing machine.

The photo below shows detailed instructions on how to sew a fur coat from mink skins at home on the sides and shoulders.

What to wear with

So, if you did all the operations correctly, you will end up with a beautiful product that fits your figure perfectly. How to complement such a beauty to make the image complete and attractive?

• First you need to choose a beautiful headdress that ideally complements an expensive fur coat made from mink skins;
• The option of a mink hat of different models is more suitable than others. Choose a color shade of the headdress that will match the color of the fur jacket. Only then will the impression of your appearance be simply stunning;
• Of course, not all girls prefer hats made of mink fur, considering them somewhat old-fashioned and outdated. For such ladies, experts recommend choosing a hat of the most expensive type. Otherwise, the ensemble of a fur coat and a hat will not be winning;
• If you purchased a mink fur model with a hood, then you don’t have to buy a hat at all.

Shoes to wear with mink skins should be selected based on the length of the fur coat:

• Floor-length options go perfectly with stiletto boots or ankle boots with a glass heel. The main thing is that the shoes look elegant and sophisticated, and not bulky and pretentious;
• Knee-length short fur coats are best worn with high boots. Moreover, they can have either a heel or a flat sole. In both options, the girl’s image will be very advantageous;
• But waist-length models provide their owners with the widest choice of shoes, because they go perfectly with absolutely all winter shoes.

How to change a hard mink hat into a soft one?

We will start with this master class on how to alter a mink hat. After all, before, hats were hard and kept their shape well. Because we tried to gelatinize the base as best as possible. Today, not only has fashion changed, but such accessories have also turned out to be not very comfortable, since they often press. Therefore, we will begin our analysis with how to disassemble the hat and make it more convenient, without greatly modifying the appearance.

• First of all, we tear off the lining.

We work carefully so as not to damage the interior

• Now a little advice - if you see hand stitches inside, then this is a good sign. This means that the felt cap was dry when the skin was pulled on. This means that it will be easier to remove. If the felt had been wet, the bonding with the flesh would have been stronger.

Cutting the seam

Taking out the felt

• But in order for the headdress to keep its shape, it is worth leaving the upper part of the cap. To do this, we cut it out along the most protruding points.

Cut it out

• We insert it into our cap, secure it with pins in the center, and turn the product inside out. Now we sew the firth itself to the flesh and along the protrusion using normal hand stitches in a circle. Make sure that the stitches on the fur side are small and do not touch the pile itself.

Leave the top part hard to keep its shape.

• We outline the line of the future new hem. In this case, the fastening tape is light. Therefore, so that it is not visible and a new one is not sewn on, we simply change the hem line.

Celebrating

• To insulate and add some volume, we will insert batting. We take measurements on the hat for the desired size. Ours is asymmetrical, so we measure from all sides.

Measurements

• Cut out the batting to the desired size. To make the bottom of the cap a little thicker, insert a strip of drape - 4 cm to the circumference of your head. Sew directly to the fur part. On the pile side the stitches are small.

Sew on the drape

• We attach the batting. To do this, we lower it a little behind the strip of drape. We sew our batting to it.

Sew on

• Now we make a fur fold. For this we use thin felt. We cut it out in a semicircle and simply fold it into the widow and sew it to the desired place.

Making a fold

• Now we completely sew on the batting and secure it to the top of the felt cap. Sew the securing tape to the felt. You can optionally insert an elastic band or ribbon so that you can adjust the volume.

Closing

• We cut out the new lining on the bias. Never use old lining material! We also cut out a round base approximately 18 cm in diameter.

Cutting out the material

• We sew it, bend it at the top and also go through it with a stitch. Now we need to tighten the upper part. To do this, we pierce the fabric and now throw the material in a spiral. It’s like winding the fabric around a needle.

Then we pull the base together using the threads

• Distribute the folds evenly. We take an ordinary jar as a basis. First we place the round part, then the rectangular base. We secure everything with an elastic band or rope to prevent fidgeting. And sew it on by hand using a regular seam.

Sew on

• We insert our lining into the fur base and secure the bottom with pins. We place it evenly - the lining should be completely flush. We secure it with pins, and then sew it with a regular seam directly to the fur, capturing a millimeter of the mesh and about 0.5 cm of the lining.

Stitching

Eventually

How much does it cost to completely alter a fur coat depending on the type of fur: price table in rubles