No matter how carefully a fur product is used, the time comes to clean it. Arctic fox fur is no exception, and its long and thick pile only contributes to this.
Street dust, dirt, worn shiny fur and loss of color - the owner of fur products must periodically deal with such pollution.
However, there are certain methods and means to get rid of it at home. This article will tell you exactly how to clean arctic fox fur.
How to clean arctic fox fur at home
Fur items have always been an attribute of luxury. Therefore, over the years of their use, a large number of effective methods for removing contaminants have appeared. But before you start cleaning using folk remedies, you need to make sure that they do not harm the surface. To do this, apply the composition to a separate area of outerwear, wait a couple of minutes and rinse with water. If there are no signs of baldness or loss of shade, the product is suitable for further use.
To clean an Arctic fox collar at home, you will need to spend a lot of time and effort. But if you adhere to general recommendations and rules, the end result will exceed all expectations:
- Fur should not be soaked or washed like any other clothing.
- Caring for such products requires natural and high-quality ingredients, and only brushes with soft bristles are allowed for combing.
- You cannot dry things on heating radiators - they must dry on their own.
- When drying or cleaning, do not place fur clothing near colored items.
Cleaning options:
- If an item is covered in street dust, it is easy to remove it with a small stick. For such cleaning it is necessary to use a sheet, which is moistened with water and carefully twisted. The fur needs to be laid out with the pile down, and then tapped on it with a cane. A wet cloth will quickly absorb all dirt, and the material will return to its previous appearance.
- You can clean a heavily stained Arctic fox's cap with wheat bran. Place a baking sheet with bran in an oven preheated to 70°C and heat for 5 minutes. Next, the product is applied to the dirty collar, which is wiped. You can get rid of bran residues with a soft brush.
- Petrol. A small amount of the substance is applied to a soft sponge and used to wipe dirty areas. You can also combine gasoline with starch in equal proportions and stir until a homogeneous paste is formed, and then rub into the fur with slow movements. The fuel will evaporate on its own, and the starch will have to be brushed out. The method is well suited for cleaning white surfaces.
- Ammonia. To effectively clean fur, you can combine 500 ml of water with ammonia and any detergent. Then the solution must be applied pointwise to dirty areas and wiped with a damp sponge.
Soap solution
You can care for an arctic fox vest using a soap solution. The product effectively removes light stains and street dust that has become embedded in the pile. To use a soap solution, you need to dilute shampoo or soap shavings in 500 ml of water and beat until foamy.
Using a cotton pad, apply the foam to the fur and rinse with stroking movements. When traces of dirt are removed, the remaining product should be removed with a damp cloth. Finally, the product is thoroughly dried.
Vinegar solution
Vinegar will help you care for your Arctic fox fur coat. The product fixes the shade and maintains the texture of delicate fabrics, and is also suitable for all types of fur. To prepare the composition you will need to take 9% table vinegar and dilute it with water in a ratio of 1:3.
You need to immerse a cotton swab in the composition and begin processing. This method removes any contaminants from the fur, regardless of their nature or complexity.
Talc
The Arctic fox collar can be updated with baby talcum powder without aromatic additives. The technology refers to dry cleaning methods and is suitable for dusty clothes. The method of application is as follows:
- The item needs to be laid out on the surface and sprinkled with talcum powder.
- The product should be thoroughly rubbed and wait 15 minutes until it absorbs all stains and dirt.
- After the specified time, the clothes should be shaken and combed with a soft pet brush.
- To remove powder residues, use a vacuum cleaner with a special attachment.
If it is not possible to comb out the talc with a brush, use a comb and a hairdryer, selecting the cold blowing mode.
Soda, alcohol
The method is very popular because... It is suitable for any dirt and all types of fur. It is necessary to add alcohol and soda to the warm liquid (the proportions of the components are 1:3) and stir them thoroughly.
Next, you need to moisten the foam rubber or soft brush with the solution, and then start wiping the pile. The action is carried out in the direction of the villi from the roots to the tips. This folk remedy removes dust and simple stains well.
Special brush
You can clean arctic fox fur from yellowness with a special brush, which is sold in stores that sell fur products. The device can be a comb with rounded teeth for gently cleaning long hairs. If the pile is of medium or short length, then you will need a soft brush with small bristles. With its help you can delicately comb out dirt and dust.
A simple massage comb, which every woman has at her disposal, is also suitable for preventive treatment.
General cleaning rules
When processing fur, you need to pay attention to the following rules:
- Use cleaning products in the quantities specified in the instructions;
- When contacting household chemicals, wear protective gloves;
- Open windows during cleaning;
- Comb and shake off the collar, maintaining a distance from heating appliances and fans;
- Wear a gauze bandage.
To prevent the collar from changing shape, turning yellow and leaving streaks on it, you need to take into account a number of recommendations:
- Process the product on a flat surface;
- Do not use synthetic rags, contaminated cotton wool or napkins;
- Put the item in the closet after drying;
- Mix products only with clean water;
- Choose a method taking into account the color of the product;
- Do not use sharp objects to scrape off dirt;
- If the collar is removable, you can put it in the washing machine. Otherwise, cleaning will be done manually.
After cleaning, the fur should be thoroughly dried in fresh air.
How to Clean White Fur
You can update a white fur vest in different ways. Such products require especially careful handling, as they quickly become stained and turn yellow. If it is not possible to dry-clean yellowed fur, proven folk remedies will come to the rescue.
You can restore the whiteness of fur using wheat flour. It needs to be heated in a dry frying pan and then applied to problem areas. The flour will quickly absorb all the dirt and have a brightening effect.
The collar also cleans well with pet shampoo. The product is diluted in water in equal proportions and applied to the surface of the fur coat. After this, the product is wiped with a damp cloth and dried in clean air.
Hydrogen peroxide
To restore the snow-white shade of your favorite fur coat or vest, you can use a proven folk method - treatment with hydrogen peroxide. Before leaving, it is necessary to carry out a superficial cleaning of the surface to remove dirt.
The product is created by adding 1 tsp to water (200 ml). peroxide. The components are combined, after which they are applied to a cotton swab and problem areas on clothing.
To improve cleaning efficiency, the fur coat can be hung in indirect sunlight. In this case, the effect of peroxide will be enhanced.
Blue
Blue can be used for all silver shades of fur products. To remove yellowness, it is enough to dilute a small amount of the product in water so that the consistency becomes slightly blue.
Then a sponge is immersed in the solution, and the process of cleaning the product from contaminants begins. After processing, the fur is placed to dry and combed.
Dyeing Arctic fox fur: preparation
You can change the natural color of a wardrobe item either in a specialized studio or yourself. The last method is several times cheaper, so let’s pay special attention to it.
First, the material is processed so that the dye spreads evenly on it. This is relatively easy to do. You just need to prepare a solution from available substances:
- 40 grams of table salt;
- Sodium bicarbonate – 40 ml;
- 20 ml of ammonia;
- Two liters of tap water at a temperature of 30-40 degrees.
All of the above ingredients should be mixed and left for half an hour. Then you should apply the mixture to your clothes. To achieve the best effect, it is recommended to arm yourself with a brush (however, be extremely careful). Then remove the slurry with a damp cloth.
The next stage of preparation is drying. It should be done in a well-ventilated room or outside in warm sunny weather.
How to clean your collar
An arctic fox collar looks elegant on any product, however, due to constant contact with the neck and face, it can become dirty and lose its attractive appearance.
To carry out a comprehensive cleaning of such an item, you can use any of the methods listed, but since the collar is small, it can be knocked out and wrapped in a damp cloth.
To remove foundation or lipstick stains, use alcohol or stain removers.
Recommendations
To slow down the aging of a product made from arctic fox fur, cleaning it at home should be carried out according to certain rules and following recommendations, such as:
- do not expose fur to prolonged exposure to moisture and regular washing;
- use only products based on natural and safe ingredients for cleaning;
- Do not dry products on heating devices or heat sources;
- make sure that during the cleaning process the fur does not come into contact with dyed items that are prone to shedding;
- Being a rather capricious fur, the Arctic fox does not tolerate the influence of perfumes and hairsprays on it - they subject the pile to gluing, which leads to its drying out and deformation.
Professional products from the store
If folk remedies do not give positive results, you need to use professional store-bought formulations:
- FURASOL;
- NETBRIL-O concentrated;
- SHINE-FINISH /TCHB / TCCB / PARVA-CHEMIE etc.
Among store-bought products, there are deep- and superficial-effect cleaners, preparations for restoring the fluffy structure, wet wipes and deep-acting foams. Similar products also have a disinfecting and antiseptic effect. At the same time, it does not contain aggressive chemical additives or harmful substances. Whole sets of fur clothing care products are available for sale, and the method of using them is simple and is indicated in the instructions.
When is the best time to go to dry cleaning?
There are cases in which home remedies do not help and you cannot do without the help of specialists. This includes situations where a person spills something on the pile.
You should contact a dry cleaner if the fur is contaminated with vegetable oil, food products, drinks and machine oils. Even seemingly harmless substances can leave difficult-to-remove stains on the lining of the product. It is almost impossible to remove stains left by perfume from the lining.
You cannot do without dry cleaning in cases where traces of foundation and cream powder remain on the collar. It is better to take products made from Arctic fox to dry cleaners that specialize specifically in fur clothing.
The correct choice of dry cleaning service, which will select the optimal temperature of perchlorethylene, will allow you to dry clean your fur coat up to 6 times.
The article has been verified by the editors
Precautionary measures
Before cleaning fur clothing, you should familiarize yourself with the precautions that will protect the product from losing its presentable and beautiful appearance. Do not forget that natural fur is not machine washable, so you need to care for it only using the methods listed above. Interaction with a small amount of moisture will not harm the fur surface, but excessive wetting will lead to the fact that the fur coat or vest will be completely damaged. If the material is wet, do not use a hair dryer or other similar equipment for drying.
Many problems with fur items occur due to improper storage. So, if the item was hung in an open room with high humidity, it will be seriously damaged.
Regardless of the method used, you should not rub the fur with vigorous movements, as this may damage it. And if the villi are long, they can be processed exclusively in the direction of growth.
In most cases, it is mentioned that they are cleaned with gasoline, ammonia, semolina, flour, wheat bran and starch. However, such products are not always suitable for fur surfaces, and their incorrect application can lead to unpleasant consequences.
Often, after choosing the wrong composition, the owner of a fur coat or vest is forced to comb it out for a long time, which disrupts the fleecy structure, making the fibers hard and beautiful. As a result of such care, the material becomes dull and begins to smell unpleasant.
Features of the polar fox's hair
The arctic fox has relatively small dimensions: it is about half a meter in length and weighs about three kilograms. This coat makes it possible to safely withstand temperatures below –50 °C. And all thanks to its such wonderful properties:
- Cover varies significantly depending on the season. In summer it is dark brown, which allows it to remain undetected in its environment;
- In winter, it changes color to pearl white and increases in size and density. Some species dress in beige or gray tones in the cold season;
- The surface wool layer is not rigid and has a considerable length. The down is dense enough to withstand strong gusts of wind.
Even after the death of the animal, its fur serves a useful service - only to humans. It has long been valued by clothing manufacturers for its excellent thermal insulation. In addition, products made from it are highly reliable and serve their owners for almost a decade. And the aesthetic characteristics make a polar fox wardrobe a tasty morsel for fashionistas all over the world.
